2017 John Deere Z950M
$5,999.00
Key Features
Product Features
Description
With the M Series, we came up with machines that would please those customers with large fleets who demand efficiency. The Z950M features a long list of available options, including Mulch On Demand decks, dump-from-seat Material Collection System capability, 3-way adjustable suspension seats and easy-to-use diagnostics.
7-Iron™ PRO and Mulch On Demand™ Mower Decks
Each Z950M mower can be paired with one of our 7-Iron PRO mower decks - available in 60 or 72-inch (152, 183-cm) widths, or a time-saving 60-inch Mulch On Demand deck. These decks are stamped from a single piece of 7-gauge steel, which means there are no welds or corners on the underside for clippings to collect and clump.
- 7-Iron™ PRO deck
- Mulch On Demand™ Available
- Gasoline Engine
- Propane Option Available
- Model no.: FX850V
- Horsepower (gross): At 3,600 rpm, 27 hp20.1 kW
- Displacement: 52 cu in.852 cc
- Cylinders: Two
- Crankcase capacity: With filter, 2 U.S. qt1.9 L
- Oil filter: Full flow, replaceable
- Lubrication: Full pressure
- Cooling: Air
- Air cleaner: Heavy-duty canister type with safety element
- Pre-cleaner: Yes
- Fuel type: Gasoline
- Fuel consumption: Under normal conditions, load, operation, and dependent on loads and operating conditions 1.1-1.9 U.S. gal./hr4.2-7.2 L/hr
- Fuel tank capacity: 11.5 U.S. gal.43.5 L
- Fuel tank switch/shut-off valve: Yes
- Charge system: 20 amp
- Battery voltage: 12 V
- Cold cranking amp: 300 amp
- Hour meter: Standard, digital
- Operator presence starting system: Brake-N-Go (hand)
- Wheel motors: Tuff Torq heavy-duty integrated piston wheel motor
- Forward: 0-10 mph0-16.1 km/h
- Reverse: 0-4.5 mph0-7.2 km/h
- Speed and direction control: Twin levers
- Hydraulic capacity: 5.9 U.S. qt5.6 L
- Filter: Internal, replaceable
- Drive tires: 24x12-12
- Load rating: 4 PR
- Dynamic braking: Twin levers
- Park brake: Internal wet disk integrated in the transmission
- Park brake actuation: Hand brake
- Type: Electro-magnetic, 225 lb-ft305 Nm
- Drive: V-belt
- Deck construction: 7-Iron PRO, one-piece stamped steel with reinforcements
- Deck thickness: 7 gauge0.180 in.4.6 mm
- Discharge: Side, MOD
- Height-of-cut range: 1-5.5 in.2.54-14 cm
- Increments: 0.25 in.0.64 cm
- Cutting width: 60, 72 in. (152, 183 cm)
- Length: Varies by deck size
- Thickness: 0.25 in.0.64 cm
- Tip speed: Approximately 18,000 fpm5,486 m/min
- Number: Three
- Caster wheel type: Flat free
- Caster wheel size: 13x6.5-6
- Front anti-scalp rollers: RH, center, LH
- Rear anti-scalp rollers: Optional
- Length: 84 in.213 cm
- Width: With chute down, 74, 86 in.188, 218 cm
- Height: With ROPS up, 73 in.185 cmWith ROPS down, 47 in.119 cm
- Weight: 1,275 to1,365 lb578 to 619 kg
Engine
Horse Power | 27 hp (20.1 kW) |
Engine Type | FX850V |
Displacement | 52 cu in. (852 cc) |
General
Transmission | Tuff Torq heavy-duty integrated piston wheel motor |
Wheel Size | Drive Tires: 24x12-12 ; Caster: 13x6.5-6 |
Fuel Capacity | 11.5 U.S. gal. (43.5 L) |
Deck
Deck Size | 60, 72 in. (152, 183 cm) |