2019 John Deere 1025R

$18,900.00

$18,900.00

Key Features

New/Used Used
Availability In Stock
LocationLake Linden, MI
Stock # 005563
VIN 1LV1025RKKK190311
Condition Good

Product Features

Description

Key Features
  • Powerful Tier 4-compliant diesel engine
  • New, easy-lift hood with dual gas-charged lift struts
  • Premium Operator Station with ergonomic seat, armrests and fender lights
  • Auto-Connect™ mid-mower deck can be installed or removed in less than 5 minutes
Features
  • Powerful Tier 4-compliant diesel engine and standard dual mid-selective control valve (SCV)
  • Easy operation four-wheel drive (4WD) power steering
  • Fast and easy implement changeover
  • Implement compounding improves efficiency
  • Hydrostatic transmission (HST) with Twin Touch™ foot controls
  • Open operator's station is comfortable and convenient
  • Optional iMatch™ Quick-Hitch feature allows for easy implement hookup
  • Easy-open, gas-lift hood
  • Mower deck lift components
  • Optional cab offers protection from elements
Key Specs
  • Engine power (gross): 17.8 kW / 23.9 hp / 24.2 PS / SAE J1995 rated power
  • Power take-off (PTO) power: 13.4 kW / 18 hp
  • Steering hydraulics: 13.2 L/min / 3.5 gpm
  • Implement hydraulics: 13.2 L/min / 3.5 gpm
  • Hitch type: Limited Category 1
  • Lift capacity, 24-in. behind link arms: 309 kg / 681 lb.
  • Standard transmission; forward/reverse: Hydrostatic - 2 range
  • Cruise control: Standard
  • Approximate shipping weight (open-station; cab): 655 kg / 1444 lb.
  • Wheelbase: 145 cm / 57.1 in.
Engine
  • Family: EYDXL1.27NS1 / FYDXL1.27NS1 / GYDXL1.27NS1
  • Manufacturer: Yanmar
  • Engine model: 3TNV80F-NCJT
  • Engine power (gross): 17.8 kW / 23.9 hp / 24.2 PS / SAE J1995 rated power
  • Power take-off (PTO) power: 13.4 kW / 18 hp
  • Rated engine speed: 3200 rpm
  • Type: Diesel
  • Injection pump type: Indirect Injection
  • Aspiration: Natural
  • Emissions compliance: Final Tier 4
  • Cylinders/displacement: 3 / 1.267 L / 3 / 77.3 cu in.
  • Number of cylinders: Three
  • Cylinder liners: Cast-in-block
  • Bore and stroke: 80x84 mm / 3.15x3.31 in.
  • Compression ratio: 23.0:1
  • Lubrication: Pressurized
  • Cooling system: Water pump
  • Air cleaner: Dual element with mechanical restriction indicator
  • Engine torque at rated speed: 55.2 Nm / 40.7 lb.-ft
  • Fuel tank capacity: 21.2 L / 5.6 U.S. gal.
Electrical
  • Battery size: 500 CCA
  • Alternator (12-V): 40 amp
  • Starter size: 1.2 kW / 1.6 hp
Fuel System
  • Type: Indirect Injection
  • Fuel consumption: 5.8 L/hr / 1.5 U.S. gal./hr
Transmission
  • Standard transmission; forward/reverse: Hydrostatic - 2 range
  • Left-hand reverser: No
  • Final drive: Bull Gear
  • Brakes: Wet disc (left-hand pedal)
  • Steering: Power
  • Clutch, wet/dry: N/A
  • Axle capacity: Front / 612 kg / 1349 lb. / Rear / 715 kg / 1576 lb.
  • Creeper: No
  • Cruise control: Standard
  • Differential lock: Yes
Hydraulics
  • Type: Open center
  • Pump rated output: Steering / 13.2 L/min / 3.5 gpm / Implement / 13.2 L/min / 3.5 gpm / 24 L/min / 6.3 gpm
  • Pump type: Gear
  • Maximum operating pressure: 137.9 bar / 2000 psi
  • Draft control sensing: Position control
  • Remote control valves available: Two
3-Point Hitch
  • Type: Limited Category 1
  • Lift capacity, 24-in. behind link arms: 309 kg / 681 lb.
Power Take-Off (PTO)
  • Standard: Rear - 540 rpm / Mid - 2100 rpm
  • Control: Independent
  • Clutch: Wet disc
  • Brake (for mid and rear PTO): Wet disc
Fluid Capacities
  • Crankcase with filter: 2.7 L / 2.9 qt
  • Transmission and hydraulic system: 3.7 gal. / 14 L
Final Drive
  • Type: Bull Gear
  • Differential lock: Yes
Operator Station
  • Rollover protective structure: Type / Foldable / Yes
  • Platform - flat/straddle: One-piece semi flat
  • Gear shift location - console/floor: Left-hand side
Cab
  • Compliance: NA
  • Visibility: NA
  • Air conditioning, temperature differential: NA
  • Doors: NA
  • Noise rating: NA
  • Seat equipment: NA
Dimensions
  • Wheelbase: 145 cm / 57.1 in.
  • Front axle clearance: 195 mm / 7.7 in.
  • Turning radius without brakes: 2.25 m / 7.4 ft
  • Limited slip differential: No
  • Approximate shipping weight (open-station; cab): 655 kg / 1444 lb.
Tires
  • Front: R4 - 18x8.5-10
  • Rear: R4 - 26x12-12
  • Front tread range: 91.8 cm / 36.1 in.
Miscellaneous
  • Toolbox: Yes
NOTES:
*Manufacturer's suggested price. Taxes, freight, setup, and delivery not included. Optional accessories and attachments not included. Equipment, models and prices may vary by dealer. Product options and accessories may not be available in all regions. The engine horsepower information is provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower will be less. Offers valid in the United States. Prices in U.S. dollars.

Engine

Engine Manufacturer Yanmar
Engine Type 3TNV80F-NCJT
Horsepower 17.8 kW (23.9 hp)
PTO HP 13.4 kW (18 hp)
Rated RPM 3200 rpm
Bore and Stroke 80x84 mm (3.15x3.31 in.)

Specifications

Wheelbase 145 cm (57.1 in.)
Weight 655 kg (1444 lb.)
Ground Clearance 195 mm (7.7 in.)
Tire Size Front: R4 - 18x8.5-10; Rear: R4 - 26x12-12

General

Fuel System Indirect Injection
Fuel Capacity 21.2 L (5.6 U.S. gal.)
Transmission Hydrostatic - 2 range
Brakes Wet disc (left-hand pedal)
Hydraulics Open center

Shopping Tools