2023 John Deere 2025R Compact Utility Tractor (18 PTO hp)

Call for Price

Call for Price

Key Features

New/Used New
Availability In Stock
LocationMountain Iron, MN
Stock # 643889
VIN 1LV2025RVPR147563
Condition Excellent

Product Features

Dealer Notes
2025R Compact Utility Tractor (18 PTO hp)
English Operator's Manual
Less Loader
Open Operator Station
Less Backhoe
Less iMatch™ Quick Hitch Category 1
12-16.5 (6PR, R4 Industrial, 1 Position) Bias Ply
23 X 8.50-12 (6PR, R4 Industrial, 1 Position) Bias Ply

Description

Key Features
  • Standard LED headlights and fender lights
  • Hydro transmission with TwinTouch™ pedals for ease of use
  • AutoConnect™ mid-mower deck can be installed or removed in less than 5 minutes
Key Specs
  • Engine power (gross): SAE J1995 rated power: 17.8 kW / 23.9 hp / 24.2 PS at 3200 rpm
  • Power take-off (PTO) power: 12.8 kW / 17.2 hp
  • Steering hydraulics: 13.4 L/min / 3.5 gpm
  • Implement hydraulics: 13.4 L/min / 3.5 gpm
  • Hitch type: Limited Category 1
  • Lift capacity, 24-in. behind link arms: 415 kg / 915 lb.
  • Standard transmission; forward/reverse: Hydrostatic - two range
  • Cruise control: Standard
  • Approximate shipping weight (open-station; cab): Open station: 849 kg / 1872 lb. / Cab: 1085 kg / 2392 lb.
  • Wheelbase: 1600 mm / 63 in.
Engine
  • Manufacturer: Yanmar®
  • Engine model: 3TNV80F-NCJT
  • Engine power (gross): SAE J1995 rated power: 17.8 kW / 23.9 hp / 24.2 PS at 3200 rpm
  • Power take-off (PTO) power: 12.8 kW / 17.2 hp
  • Rated engine speed: 3200 rpm
  • Type: Diesel
  • Injection pump type: Indirect injection
  • Aspiration: Natural
  • Emissions compliance: Final Tier 4
  • Cylinders/displacement: Three cylinders: 1.267 L / 77 cu in.
  • Number of cylinders: Three
  • Cylinder liners: Cast-in-block
  • Bore and stroke: 80 x 84 mm / 3.2 x 3.3 in.
  • Compression ratio: 23.1:01
  • Lubrication: Pressurized
  • Cooling system: Water pump
  • Air cleaner: Dual element
  • Engine torque at rated speed: 53.1 Nm / 39.1 lb.-ft
  • Fuel tank capacity: 20.4 L / 5.39 gal.
Electrical
  • Battery size: 500 CCA
  • Alternator (12-V): 40 amp
  • Starter size: 1.2 kW / 1.6 hp
Fuel System
  • Type: Indirect injection
Transmission
  • Standard transmission; forward/reverse: Hydrostatic - two range
  • Left-hand reverser: No
  • Final drive: Spur gear
  • Brakes: Wet disc
  • Steering: Power steering
  • Axle capacity: Front / 612 kg / 1349 lb. / Rear / 1100 kg / 2425 lb.
  • Creeper: No
  • Cruise control: Standard
  • Differential lock: Yes
Hydraulics
  • Type: Open center
  • Pump rated output: Steering / 13.25 L/min / 3.5 gpm / Implement / 13.25 L/min / 3.5 gpm / 26.5 L/min / 7.0 gpm
  • Pump type: Gear
  • Maximum operating pressure: 137 bar / 1987 psi
  • Draft control sensing: Position control
  • Remote control valves available: Two
3-Point Hitch
  • Type: Limited Category 1
  • Lift capacity, 24-in. behind link arms: 415 kg / 915 lb.
Power Take-Off (PTO)
  • Standard: Rear - 540 rpm / Mid - 2100 rpm
  • Control: Independent
  • Clutch: Wet disk
  • Brake (for mid and rear PTO): Wet disk
Fluid Capacities
  • Crankcase with filter: 2.7 L / 2.9 qt
Final Drive
  • Type: Spur gear
  • Differential lock: Yes
Operator Station
  • Rollover protective structure: Type / Foldable / OSHA, SAE, ASAE
  • Platform - flat/straddle: Three-piece semi flat
  • Gear shift location - console/floor: Left-hand side
Dimensions
  • Wheelbase: 1600 mm / 63 in.
  • Turning radius without brakes: Outside front tire: 2.51 m / 8.2 ft
  • Limited slip differential: No
  • Approximate shipping weight (open-station; cab): Open station: 849 kg / 1872 lb. / Cab: 1085 kg / 2392 lb.
Tires
  • Front: R3 Turf: 23x8.50-12 / R3 Radial: 220/55-R12 / R4 Industrial: 23x8.50-12
  • Rear: R3 Turf: 12-16.5 / R3 Radial: 280/70 R16 / R4 Industrial: 12-16.5
Miscellaneous
  • Toolbox: Yes
  • Tilt steering wheel: Yes
  • 12-V Outlet: Yes
NOTES:
*Manufacturer's suggested price. Taxes, freight, setup, and delivery not included. Optional accessories and attachments not included. Equipment, models and prices may vary by dealer. Product options and accessories may not be available in all regions. The engine horsepower information is provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower will be less. Offers valid in the United States. Prices in U.S. dollars.

Engine

Engine Manufacturer Yanmar®
Engine Type 3TNV80F-NCJT
Horsepower SAE J1995 rated power: 17.8 kW (23.9 hp)
PTO HP 12.8 kW (17.2 hp)
Rated RPM 3200 rpm
Bore and Stroke 80 x 84 mm (3.2 x 3.3 in.)

Specifications

Wheelbase 1600 mm (63 in.)
Weight Open station: 849 kg (1872 lb.); Cab: 1085 kg (2392 lb.)
Tire Size Front: R3 Turf: 23x8.50-12 / R3 Radial: 220/55-R12 / R4 Industrial: 23x8.50-12; Rear: R3 Turf: 12-16.5 (R3 Radial: 280/70 R16 (R4 Industrial: 12-16.5)

General

Fuel System Indirect injection
Fuel Capacity 20.4 L (5.39 gal.)
Transmission Hydrostatic - two range
Brakes Wet disc
Hydraulics Open center

Shopping Tools