2024 John Deere 3025E Compact Utility Tractor

Call for Price

Call for Price

Key Features

New/Used New
Availability In Stock
LocationMoose Lake, MN
Stock # 722310
VIN 1LV3025EERR169170
Condition Excellent

Product Features

Dealer Notes
3025E Compact Utility Tractor
English Operator's Manual and Decal Kit
Factory Installed Loader with Bucket
Less iMatch™ Quick Hitch Category 1
Draft Links - Flat Bar (Standard)
43x16-20 6PR R4 Industrial
27x8.50-15 6PR R4 Industrial

Description

Compact Utility Tractor

Key Features
  • Standard four-wheel drive (4WD) for maximum traction
  • Tightest turning radius in its horsepower class
  • Hydro transmission with Twin Touch™ pedals for ease of use
Key Specs
  • Engine power (gross): SAE J1995 rated power: 18.2 kW / 24.4 hp / 24.7 PS at 2400 rpm
  • Power take-off (PTO) power: 13 kW / 17.4 hp
  • Steering hydraulics: 15 L/min / 4 gpm
  • Implement hydraulics: 20.2 L/min / 5.3 gpm
  • Hitch type: Category 1
  • Lift capacity, 24-in. behind link arms: 615 kg / 1356 lb.
  • Standard transmission; forward/reverse: Hydrostatic transmission (HST)
  • Cruise control: Optional
  • Approximate shipping weight (open-station; cab): Open operator station (OOS): 1181 kg / 2603 lb. / Cab: Not applicable
  • Wheelbase: 1593 mm / 62.7 in.
Engine
  • Family: EYDXL1.64NDA / FYDXL1.64NDA / GYDXL1.64NDA
  • Manufacturer: Yanmar
  • Engine model: 3TNV88F-EPJT2
  • Engine power (gross): SAE J1995 rated power: 18.2 kW / 24.4 hp / 24.7 PS at 2400 rpm
  • Power take-off (PTO) power: 13 kW / 17.4 hp
  • Rated engine speed: 2400 rpm
  • Type: Diesel
  • Injection pump type: Direct injection
  • Aspiration: Natural
  • Emissions compliance: Final Tier 4
  • Cylinders/displacement: 3 / 1.64 L / 3 / 100.2 cu in.
  • Number of cylinders: Three
  • Cylinder liners: Cast-in-block
  • Bore and stroke: 88 x 90 mm / 3.46 x 3.54 in.
  • Compression ratio: 19.1:1
  • Lubrication: Pressurized
  • Cooling system: Water pump
  • Air cleaner: Dual element
  • Engine torque at rated speed: 72.4 Nm / 53.4 lb.-ft
  • Fuel tank capacity: 28.5 L / 7.5 U.S. gal.
Electrical
  • Battery size: 500 CCA
  • Alternator (12-V): 55 amp
  • Starter size: 1.4 kW / 1.9 hp
Fuel System
  • Type: Direct injection
Transmission
  • Standard transmission; forward/reverse: Hydrostatic transmission (HST)
  • Left-hand reverser: No
  • Final drive: Spur gear
  • Brakes: Wet disk
  • Steering: Power steering
  • Axle capacity: Front / 880 kg / 1940 lb. / Rear / 1200 kg / 2645 lb.
  • Creeper: No
  • Cruise control: Optional
  • Differential lock: Yes
Hydraulics
  • Type: Open center
  • Pump rated output: Steering / 15 L/min / 4 gpm / Implement / 20.2 L/min / 5.3 gpm / 35.2 L/min / 9.3 gpm
  • Pump type: Dual gear
  • Maximum operating pressure: 172 bar / 2495 psi
  • Draft control sensing: Position control
  • Remote control valves available: Up to two (Optional)
3-Point Hitch
  • Type: Category 1
  • Lift capacity, 24-in. behind link arms: 615 kg / 1356 lb.
Power Take-Off (PTO)
  • Standard: Rear - 540 rpm
  • Control: Independent
  • Clutch: Wet disk
  • Brake (for mid and rear PTO): Wet disk
Fluid Capacities
  • Crankcase with filter: 4.5 L / 4.8 qt
  • Transmission and hydraulic system: 20.8 L / 22 qt
Final Drive
  • Type: Spur gear
Operator Station
  • Rollover protective structure: Type / Foldable
  • Platform - flat/straddle: Straddle
  • Gear shift location - console/floor: Left-hand side
Dimensions
  • Wheelbase: 1593 mm / 62.7 in.
  • Front axle clearance: Minimum: 299 mm / 11.8 in. / Maximum: 333 mm / 13.1 in.
  • Turning radius without brakes: 2.9 m / 9.4 ft
  • Approximate shipping weight (open-station; cab): OOS: 1181 kg / 2603 lb. / Cab: Not applicable
Tires
  • Front: R1 Bar: 7-14 / R3 Turf: 27x8.5-15 / R4 Industrial: 25x8.5-14 / R4 Industrial: 27x8.5-15
  • Rear: R1 Bar: 11.2-24 / R3 Turf: 41x14-20 / R4 Industrial: 15-19.5 / R4 Industrial: 43x16-20
NOTES:
1Manufacturer's suggested price. Taxes, freight, setup, and delivery not included. Optional accessories and attachments not included. Equipment, models and prices may vary by dealer. Product options and accessories may not be available in all regions.

*The engine horsepower information is provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower will be less. Offers valid in the United States. Prices in U.S. dollars.

Engine

Engine Manufacturer Yanmar
Engine Type 3TNV88F-EPJT2
Horsepower SAE J1995 rated power: 18.2 kW (24.4 hp)
PTO HP 13 kW (17.4 hp)
Rated RPM 2400 rpm
Bore and Stroke 88 x 90 mm (3.46 x 3.54 in.)

Specifications

Wheelbase 1593 mm (62.7 in.)
Weight OOS: 1181 kg (2603 lb.)
Ground Clearance Minimum: 299 mm (11.8 in. (Maximum: 333 mm (13.1 in.)
Tire Size Front: R1 Bar: 7-14 / R3 Turf: 27x8.5-15 / R4 Industrial: 25x8.5-14 / R4 Industrial: 27x8.5-15; Rear: R1 Bar: 11.2-24 (R3 Turf: 41x14-20 (R4 Industrial: 15-19.5 (R4 Industrial: 43x16-20)

General

Fuel System Direct injection
Fuel Capacity 28.5 L (7.5 U.S. gal.)
Transmission Hydrostatic transmission (HST)
Brakes Wet disk
Hydraulics Open center

Shopping Tools