2024 John Deere 3046R Compact Utility Tractor (34 PTO hp)
Call for Price
Key Features
New/Used New
Availability
In Stock
LocationNegaunee, MI
Stock #
662702
VIN
1LV3046RHRR410592
Condition
Excellent
Product Features
Dealer Notes
3046R Compact Utility Tractor
English Operator's Manual and Decal Kit
eHydro™
Less Loader
Deluxe Cab with Air Ride Seat
Factory Installed Stereo
Dual Mid & Single Electrohydraulic Rear SCV
Mid PTO
Less iMatch™ Quick Hitch Category 1
43x16-20 (4PR, R4 Industrial, 2 Position)
27x8.50-15 (6PR, R4 Industrial, 2 Position)
English Operator's Manual and Decal Kit
eHydro™
Less Loader
Deluxe Cab with Air Ride Seat
Factory Installed Stereo
Dual Mid & Single Electrohydraulic Rear SCV
Mid PTO
Less iMatch™ Quick Hitch Category 1
43x16-20 (4PR, R4 Industrial, 2 Position)
27x8.50-15 (6PR, R4 Industrial, 2 Position)
Description
Compact Utility Tractor
Key Features
- AutoConnect™ deck compatible for deck attach/detach in seconds
- Cab or Open Station configuration available
- Standard hydrostatic transmission with Twin Touch™ pedals
Key Specs
- Engine power (gross): SAE J1995 rated power: 33.3 kW / 44.7 hp / 45.3 PS at 2600 rpm
- Power take-off (PTO) power: 25.2 kW / 33.9 hp
- Steering hydraulics: 23.5 L/min / 6.2 gpm
- Implement hydraulics: 34.3 L/min / 9.1 gpm
- Hitch type: Category 1
- Lift capacity, 24-in. behind link arms: 995 kg / 2194 lb.
- Standard transmission; forward/reverse: eHydro transmission
- Cruise control: Standard
- Approximate shipping weight (open-station; cab): Open operator station (OOS): 1391 kg / 3066 lb. / Cab: 1818 kg / 4008 lb.
- Wheelbase: 1727 mm / 68 in.
Engine
- Manufacturer: Yanmar®
- Engine model: 3TNV86CHT-MJTV
- Engine power (gross): SAE J1995 rated power: 33.3 kW / 44.7 hp / 45.3 PS at 2600 rpm
- Power take-off (PTO) power: 25.2 kW / 33.9 hp
- Rated engine speed: 2600 rpm
- Type: Diesel
- Injection pump type: High pressure common rail direct injection
- Aspiration: Turbocharged and intercooled
- Emissions compliance: Final Tier 4
- Cylinders/displacement: Three cylinders: 1.57 L / 95.7 cu in.
- Number of cylinders: Three
- Cylinder liners: Cast-in-block
- Bore and stroke: 86 x 90 mm / 3.4 x 3.54 in.
- Compression ratio: 19.1:1
- Lubrication: Pressurized
- Cooling system: Liquid
- Air cleaner: Dual element
- Engine torque at rated speed: 112.3 Nm / 90 lb.-ft
- Fuel tank capacity: OOS: 37.4 L / 10 U.S. gal. / Cab only: 47.6 L / 12.6 U.S. gal.
Electrical
- Battery size: 500 CCA
- Alternator (12-V): 75 amp
- Starter size: 1.4 kW / 1.9 hp
Fuel System
- Type: High pressure common rail direct injection
Transmission
- Standard transmission; forward/reverse: eHydro transmission
- Transmission gear ranges: Three-range, infinitely variable
- Final drive: Spur gear
- Brakes: Wet disk
- Steering: Hydrostatic power steering
- Axle capacity: Front / 1450 kg / 3197 lb. / Rear / 1850 kg / 4079 lb.
- Cruise control: Standard
Hydraulics
- Type: Open center
- Pump rated output: Steering / 23.5 L/min / 6.2 gpm / Implement / 34.3 L/min / 9.1 gpm / 57.8 L/min / 15.3 gpm
- Pump type: Single gear
- Maximum operating pressure: 172 bar / 2495 psi
- Draft control sensing: Position control
- Remote control valves available: Up to six rear remotes
3-Point Hitch
- Type: Category 1
- Lift capacity, 24-in. behind link arms: 995 kg / 2194 lb.
Power Take-Off (PTO)
- Standard: Independent rear: 540 rpm
- Optional: Mid: 2100 rpm
- Control: Lever and switch
- Clutch: Wet disk
- Brake (for mid and rear PTO): Wet disk
Fluid Capacities
- Crankcase with filter: 5.7 L / 6 qt
- Transmission and hydraulic system: 26.5 L / 7 U.S. gal.
Final Drive
- Type: Spur gear
Operator Station
- Rollover protective structure: Type / Foldable
- Platform - flat/straddle: One-piece semi flat
Cab
- Compliance: Complies with OSHA, SAE, and CSA standards for rollover protection
- Visibility: 360 degree (angle)
- Doors: Two
- Noise rating: 80 dBA
- Seat equipment: Scissor-link
Dimensions
- Wheelbase: 1727 mm / 68 in.
- Front axle clearance: Minimum: 171 mm / 6.7 in. / Maximum: 299 mm / 11.8 in.
- Turning radius with brakes: 2.7 m / 8.8 ft
- Turning radius without brakes: 2.8 m / 9.2 ft
- Approximate shipping weight (open-station; cab): OOS: 1391 kg / 3066 lb. / Cab: 1818 kg / 4008 lb.
Tires
- Front: R1 Bar: 7-14 / R3 Turf : 27x8.50-15 / R3 Turf Special: 25/10.5LLx15 / R4 Industrial: 25x8.5-14 or 27x8.5-15
- Rear: R1 Bar: 11.2-24 / R3 Turf: 41x14-20 / R3 Turf Special: 41x18LL-16.1 / R4 Industrial: 15-19.5 or 43x16-20
- Front tread range: 1117 mm / 44 in.
- Rear tread spacing: 1031 mm / 40.6 in.
NOTES:
1Manufacturer's suggested price. Taxes, freight, setup, and delivery not included. Optional accessories and attachments not included. Equipment, models and prices may vary by dealer. Product options and accessories may not be available in all regions.*The engine horsepower information is provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower will be less. Offers valid in the United States. Prices in U.S. dollars.
Engine
| Engine Manufacturer | Yanmar® |
| Engine Type | 3TNV86CHT-MJTV |
| Horsepower | SAE J1995 rated power: 33.3 kW (44.7 hp) |
| PTO HP | 25.2 kW (33.9 hp) |
| Rated RPM | 2600 rpm |
| Bore and Stroke | 86 x 90 mm (3.4 x 3.54 in.) |
Specifications
| Wheelbase | 1727 mm (68 in.) |
| Weight | OOS: 1391 kg (3066 lb.); Cab: 1818 kg (4008 lb.) |
| Ground Clearance | Minimum: 171 mm (6.7 in. (Maximum: 299 mm (11.8 in.) |
| Tire Size | Front: R1 Bar: 7-14 / R3 Turf : 27x8.50-15 / R3 Turf Special: 25/10.5LLx15 / R4 Industrial: 25x8.5-14 or 27x8.5-15; Rear: R1 Bar: 11.2-24 (R3 Turf: 41x14-20 (R3 Turf Special: 41x18LL-16.1 (R4 Industrial: 15-19.5 or 43x16-20) |
General
| Fuel System | High pressure common rail direct injection |
| Fuel Capacity | OOS: 37.4 L (10 U.S. gal.) |
| Transmission | eHydro transmission |
| Brakes | Wet disk |
| Hydraulics | Open center |
