2024 John Deere C450 Center-Pivot Rotary Mower-Conditioner

$67,054.00

Overview

New/Used New

Availability In Stock

LocationGrand Rapids, MN

Stock # 665420

VIN 1P0C450SJRA000051

Condition Excellent

Product Features

Dealer Notes

C450 Center-Pivot Rotary Mower-Conditioner
V10 Roll Conditioner
Bolted Knife
Drawbar Swivel Hitch
Hydraulic Tilt Control

Description

Description

Key Specs

PTO speed: 1000 rpm
1000 rpm 1-3/8 in. PTO: 100-150 hp / 75-112 kW
Standard hitch: Rockshaft swivel
Optional hitch: Drawbar swivel
Hydraulic pressure required: 15,513 kPa / 2,250 psi
Cutterbar - cutting width: 4.5 m / 14.5 ft
Number of disks/knifes: 9 / 18
Transport width: 4.5 m / 14.5 ft

Tractor equipment

Tractor connection: 21 spline
Standard hitch: Rockshaft swivel
Optional hitch: Drawbar swivel
Hydraulic pressure required: 15,513 kPa / 2,250 psi

Cutterbar

Type: John Deere
Cutting width: 4.5 m / 14.5 ft
Cutting height: 1.6-11.8 cm / 0.63-6.7 in.
Number of disks: 9
Number of knives: 18
Disk speed: 2,650 rpm
Knife tip speed: 307 km/h / 191 mph
Disk drive: Gear
Lubrication: Hy-Gard oil
Oil reservoir capacity: 10.4 L / 11 U.S. qt
Cutterbar oil check: Combination sight glass, drain plug
Angle adjustment: Manual or hydraulic
Angle range: 2-8 degree (angle)
Cutterbar protection: ShearHub
Adjustable gauge shoes: Yes

Impeller conditioner

Width: 268 cm / 106 in.
Diameter: 59.5 cm / 23.4 in.
Tines type: V-tines
Number of tines: 72
Number of speeds: Two
Drive: 3-V powerband belt and sheaves

Rolls conditioner

Width: 269 cm / 106 in.
Diameter: 25.4 cm / 10 in.
Type of material: Urethane or Steel
Design: Urethane: Recessed cleat, Steel Intermeshing flutes (V-10 and Tri-Lobe)
Speed: 800 rpm
Drive: Telescoping shaft

Dimensions

Transport width: 4.5 m / 14.5 ft
Transport length: 8.8 m / 28.9 ft
Weight, roll conditioner: With Urethane roll conditioner: 3,161 kg / 6,969 lb. / With V-10 steel roll conditioner: 3,270 kg / 7,209 lb. / With tri-lobe steel roll conditioner: 3,325 kg / 7,330 lb.
Weight, impeller conditioner: 3,078 kg / 6,785 lb.
Standard tires: 31x13.5-15, 8PR

Key Features

Easier serviceability with modular-design cutterbar
Updated design and styling
Reduce service time with Quick Change Knives
Steel roll conditioners
Impeller, urethane, V-10 conditioners or Tri-Lobe conditioners

Product Specs

General

Working Width	14.5 ft. (4.5 m)
Width	106 in. (268 cm)

Value Your Trade in 30 Seconds